Bluelab Dosetronic Solenoid Kit Manual do Utilizador descarregar pdf (Página 39)

Version S1.3 : 260511

Bluelab Dosetronic Solenoid Kit

Bluelab Corporation Limited

Trouble shooting

6.1 Overview

In general, if your actual readings are flashing there will be a problem with the measurement e.g ineffective control. If the required

reading is flashing then there will be a problem with the method of control e.g an actual value is outside one of the lockout values.

(see page 30 for more a detailed explanation)

Nutrient reading low Contaminated probe Clean Conductivity probe (see p.31)

pH reading inaccurate Contaminated probe Clean pH probe (see p.32). Replace probe if in doubt

Calibration has expired Calibrate pH probe (see p.25)

6.2 Error Messages

Err

----

Probe is disconnected or

sensor is damaged

EC or pH temperature is out of

range (0-50°C)

Measurement is under range

Measurement is over range

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 45

Sem comentários

Bluelab Dosetronic Solenoid Kit Manual do Utilizador Página 39