Bluelab Combo Meter Manual do Utilizador Página 1

Contents pageFeatures 2Bluelab Combo Meter 2Introduction 3Preparing for use 3Calibration 4Changing nutrient andtemperature display units 6Measurin

English1010.0 Storing the Bluelab Combo MeterStore the Combo Meter in a cool, dry and clean place when not in use.Keep out of direct sunlight.Keep Co

English1112.0 Technical speci cationspH Conductivity TemperatureMeasurement range0.0 - 14.0 pH0 - 9.9 EC0 - 99 CF0 - 4950 ppm 500 (TDS)0 - 6930 ppm 7

English1213.0 Troubleshooting guideTrouble Reason CorrectionNutrient reading lowContaminated conductivity/temperature probe.Clean conductivity/tempera

English13pH probes do not last forever. They agethrough normal use and will eventually fail.To ensure you receive a long life from your pHprobe, pleas

English14If you need assistance or advice - we’re here to help you.Phone: +64 7 578 0849 Fax: +64 7 578 0847Email: [email protected]

English2FeaturesMeasures pH, conductivity / nutrient (EC, CF, ppm 500 and ppm 700)and temperature (°C, °F)Lightweight and portable Replaceable double

English31.0 IntroductionThe Bluelab Combo Meter has three press buttons; ‘pH / calibrate’, ‘nutrient / units’ and ‘temp / units’. The buttons have a s

English43.0 CalibrationpH calibration is required before fi rst use to ensure that the fi rst reading is accurate.• The Bluelab Conductivity/Tempera

English53.0 Calibration cont.To calibrate the pHClean pH probe tip.See Section 8.0 (the pH probe does not require cleaning before the fi rst use).pH

English64.0 Changing nutrient and temperature display unitsNutrient and temperature can be displayed in different units. The units available are show

English76.0 Battery replacementBatteries are replaced in the Bluelab Combo Meter when the low battery indicator appears on screen. The low battery ind

English87.0 Cleaning the conductivity/temperature probeCleaning the Bluelab Conductivity/Temperature ProbeCleaning the conductivity/temperature probe

English98.0 Cleaning the Bluelab pH ProbeTo ensure accurate readings the pH probe tip needs to be rinsed in water after each use and cleaned prior to